To Setup the GPRS Profile

1. Go to the Main Screen and press L (or tap on the Menu thingy at the bottom of the screen)
2. Select Browser
3. Select Data account
4. Select GPRS
5. Scroll to any profile and select Edit (Press L or tap Edit)
6. Tap on Account name and select Edit
7. For the Account name enter #Profile then select Options then Done
8. Tap on APN and select Edit
9. For the APN enter #InternetAPN then select Options then Done
10. Tap on User name and select Edit
11. For the User name enter #Username then select Options then Done
12. Tap on Password and select Edit
13. For the Password enter #Password then select Options then Done
14. Tap on Auth. type and set it to #Authentication
15. Tap on Primary DNS and enter #DNS
16. Tap on Secondary DNS and enter #DNS
17. Press Done
18. When asked to Save? press Yes

To Setup the Browser Profile

1. Go to the Main Screen and press L (or tap on the Menu thingy at the bottom of the screen)
2. Select Browser
3. Select Internet service
4. Select Settings
5. Select Profiles
6. Select Add new
   Note Scroll to an existing profile and select OK then select Edit to edit it
7. Tap on Profile name and select Edit
8. For the Profile name enter #Profile then select Options then Done
9. Tap on Homepage then select Edit
10. For the Homepage enter #Homepage then select Options then Done
11. Tap on Data account then tap Select
12. Tap on GPRS
13. Tap on the Profile created above
14. Scroll down and tap on HTTP then press Select
15. For the Connection type tap on #ConnectionMode
16. Set Use proxy to #Proxy
17. If Use Proxy is set to Yes follow the next two steps, otherwise tap Done
18. For the Proxy address enter #InternetProxy
19. For the Proxy port enter #InternetPort then tap OK
20. Tap on User name then select Edit
21. For the User name enter #Username then select Options then Done
22. Tap on Password then select Edit
23. For the Password enter #Password then select Options then Done
24. Tap Done
25. When prompted to Save? select Yes
26. Scroll to the Profile just created and select OK
27. Select Activate to activate the profile
28. The Internet should not be setup.