To setup the Access Point

1. Go to the Main Screen
2. Tap the Menu key (4 dot button)
   
3. Tap on the Settings tab (fourth tab)
   
4. Select More
   
5. Select Connection
   
6. Select Network Profiles
   
7. Select New
   
8. For the Connection Title enter #Profile then tap OK
   
9. Tap Authentication and tap on #Authentication
   
10. For the User Name enter #Username then tap OK
    
11. For the Password enter #Password then tap OK
    
12. For the APN enter #MMSAPN then tap OK
    
13. Tap Save

To setup the Picture Messaging

1. Go to the Main Screen
2. Tap the Menu key (4 dot button)
   
3. Select Messaging
   
4. Select Message Settings
   
5. Select Multimedia Message
   
6. Select Message Center
   
7. Tap Options then select New
   
8. For the Name enter #Profile then tap OK
   
9. For the MMSC URL enter #MMSC then tap OK
   
10. For the MMSC Proxy enter #MMSProxy then tap OK
    
11. For the MMSC Port enter #MMSPort then tap OK
    
12. Tap on Connection Mode then tap #ConnectionMode
    
13. Tap on Network Profile then tap the Profile created above
    
14. Tap Save
    
15. Tap the Profile just created
    
16. Tap Activate
    
17. Picture Messaging is now setup.