How to configure the Picture Messaging on a Motorola W510
To setup the MMS Internet Profile
- Go to the Main Screen
- Press the Center key to bring up the Menu
- Select WebAccess
- Select Web Sessions
- Press Options and select New
- Select Name
- For the Name enter #Profile then press Ok
- Select Homepage
- For the Homepage enter #Homepage then press Ok
Note that the homepage is not neccessary for MMS Setup
- Select Service Type 1
- Select #ServiceType
- Select Proxy 1
- For the Proxy 1 enter #MMSProxy then press Ok
- Select Port 1
- For the Port 1 enter #MMSPort then press Ok
- Select Domain 1
- For the Domain 1 enter #DNS then press OK
- Skip the options until Timeout
- Select Timeout
- Select 15 or max then press OK
- Skip the next options until GPRS APN
- Select GPRS APN
- For the GPRS APN enter #MMSAPN then press Ok
- Select Username
- For the Username enter #Username and press Ok
- Select Password
- For the Password enter #Password and press Ok
- Press Done
- Scroll to the Profile just created
- Press Options and select Set Default
- The Internet is now setup
To setup the Picture Messaging Profile
- Go to the Main Screen
- Press the Center key to bring up the Menu
- Select Messages
- Select Message Inbox
- Press Options
- Select Setup
- Select Multimedia Msg Setup
- Select Server Info (press Change)
- Press Options
- Select New
Note that if there are three existing profiles, select Delete to delete an exisisting profile first.
- Select Service Name
- For the Service Name enter #Profile then press Ok
- Select Server Name
- For the Server Name enter #MMSC then press Ok
- Select Web Session Name
- Select the Profile created above
- Press Done
- Select the Profile just created to set it as the Default Profile
- The Picture Messaging is now setup.
Rating |
|
|---|---|
| Was this article helpful? Current Rating: 0 |
|
There are no comments yet...Kick things off by filling out the form below.