How to configure the Picture Messaging on a Motorola Razr v3

APN Setup

1. Go to the Main Menu
2. Press Menu
3. Select Web Access
   Note that this may be located elsewhere, such as under Settings or Settings > Tools
4. Select Web Sessions
5. Select New Entry
   If no new entries are available, delete one of existing profiles or edit one
6. For the Profile Name enter in the #Profile
7. For the Homepage enter in #Homepage
8. Set Service Type 1 to #ServiceType
9. For the Gateway IP 1 enter in #MMSProxy
   This option may be listed as Proxy
10. For the Port 1 enter in #MMSPort
11. For the Domain 1 to #Domain
12. Set the Timeout to 15 Minutes
13. For the GPRS APN enter in #MMSAPN
14. For the Username enter in #Username
15. For the Password enter in #Password
16. Press Done to save the entry

Picture Messaging Setup

1. Go to the Main Menu
2. Select Messages
3. Select Message Inbox
4. Press Menu
5. Select Setup
6. Select MMS Message Setup (Multimedia Msg Setup)
   
7. Select Server Info
8. Press Menu and select New Entry or Add
   Note that if there are three entries already listed, one or more entries must be deleted first
   To delete a desired entry, select Menu and select Delete. If unable to delete, perform a Master Reset and start again.
9. For the Service Name enter #Profile
10. For the Server Name enter #MMSC
11. Set the Web Session Name to the MMS Profile created above
12. Select Save or Done
13. Highlight the profile
14. Press Menu and select Set Default
15. Test the settings by sending and retrieving a Picture Message.